The 5 power stations we'd trust with a blackoutTop 5 power stations 2026 → See the ranking

Goal Zero Yeti 300 Review

A 297 Wh battery, automatic switch-over when the grid drops and a LiFePO4 battery (4,000 cycles stated): the Goal Zero Yeti 300 covers what matters most in a power station. It is a good match for a CPAP or a router through a short outage, at 7.1/10 on its documented specs.

Specifications
BrandGoal Zero
CategoryPortable power stations
Battery capacity297 Wh (stated in the Full listing title, not verified against manufacturer documentation)
Charge cycles (stated)4,000
UPS / EPS modeStated in the listing
ASINB0CRD8CVD8

Full listing title: Goal Zero Yeti 300 Portable Power Station, 297Wh LiFePO4, Solar Ready

Updated November 13, 2026
Exact listing, ASIN B0CRD8CVD8
Rating from a published formula

Compared with similar power stations

The two power stations closest to it on our rating, with a dated price.

Compare side by side ↗

BLUETTI Elite 30 V2

BLUETTI Elite 30 V2

7.1Good · out of 10$289.99 -35% List price $449Save $159.01 vs. list price Price on Nov 17, 2026 · may have changed
  • Stated: 288 Wh · 600 W output
  • Portable power stations
See the review ↗
Jackery Explorer 300

Jackery Explorer 300

7.1Good · out of 10$289 Price on Nov 17, 2026 · may have changed
  • Stated: 292 Wh
  • Portable power stations
See the review ↗

297 Wh of stored energy

Battery capacity stated in the listing. Plan on roughly 252 Wh at the outlet after conversion losses (our 0.85 rule of thumb).

What it has going for it

What changes when the power goes out

297 Wh battery. At a steady 100 W that is roughly 2.5 hours, after the usual conversion losses (our 0.85 rule of thumb). That covers phones, lights, a router and a laptop, not a fridge for long.

UPS / EPS mode. Leave the router, the PC or a CPAP plugged in through it: when the grid drops, the station takes over on its own. Before you trust it with a desktop computer, read the manual on switch-over time.

LiFePO4, 4,000 cycles. Rated for 4,000 charge cycles, per the listing. Even at one full cycle a week, it takes a long time before the battery becomes the weak point.

Great for you if…

  • You need phones, lights and a laptop covered, not the fridge
  • The router or a CPAP has to stay on without you touching anything
  • You want a battery built for thousands of cycles

Skip it if…

  • You want the fridge on it for hours: 297 Wh won't stretch that far
  • You'd rather wait for buyer reviews: none are captured for this listing yet
  • You want a whole weekend without recharging: our rule of thumb gives about 2.5 hours at 100 W

What Goal Zero promises

The seller states, word for word, in the Goal Zero Yeti 300 listing:

  • The Yeti 300 can run air pumps, recharge phones and laptops, and power the Goal Zero Skylight, it has 350 W AC power out with 600 W surge abilities.
  • Upgraded LiFePO4 battery technology means the battery has 4,000+ cycles for over 10 years of daily use.
  • Just switch over to High-speed charging mode—it’ll be ready to go by the time you finish packing, this power station charges from 0% to 100% in about 50 minutes.
  • It also has an IPX4 rating for water resistance and can handle extreme temperatures.

Their words and their figures.

Goal Zero Yeti 300, view 3

Price and availability

See current price ↗

We have no recent price on file for this listing, so we don't print an old one.

The button opens the exact listing (ASIN B0CRD8CVD8), where today's price, stock and seller apply.

Goal Zero Yeti 300, view 4

A better match for your load list?

Need longer runtime? The BLUETTI AC180 (9.4/10) states 1,152 Wh, about twice as much.

Want the panel in the same box? The Jackery Explorer 1000 v2 + 200W Panel (9.3/10) comes as a kit, station and panel matched by the seller.

Our take

The verdict

Our favourite thing about the Goal Zero Yeti 300 is a 297 Wh battery, closely followed by automatic switch-over when the grid drops. No buyer reviews yet, so the Goal Zero Yeti 300 has to win you over on paper. The catch with this Goal Zero power station: no word on the continuous output or the weight. We'd pick the Goal Zero if you need phones, lights and a laptop covered, not the fridge; otherwise, put it next to the BLUETTI Elite 30 V2 first.

Living with it

Delivery day

Charge it to full from the wall, then plug in a lamp and one thing you really rely on, so you know how it behaves before you need it.

The first outage

If the router or the fridge already runs through it, the switch-over happens on its own. Watch the percentage for the first hour; it tells you more about your real runtime than any chart. Our rule of thumb says about 2.5 hours at 100 W.

Recharging

It refills from the wall between outages. Know how you would top it up if the grid stays down for days.

Between storms

Store it at the charge level the manual recommends and top it up every few months. LiFePO4 cells are relaxed about this, but every battery slowly self-discharges. Our storage guide has the routine.

The one thing we'd check first

Before you add the Goal Zero Yeti 300 to your cart: check the switch-over time, because the listing names a UPS mode but no switch-over time for its 297 Wh, so ask before a desktop PC or a CPAP relies on it.

Before you buy

Your load list

297 Wh, per the listing. Write down what has to run at the same time and for how long, then let our runtime calculator do the sums.

The start-up spike

Anything with a compressor or a motor pulls a short spike when it starts; our refrigerator guide shows how to check a fridge or a freezer.

The switch-over

Ask the seller for the transfer time in milliseconds, then check it against what your PC or medical device tolerates. Our EPS vs UPS guide explains the difference.

Where it lives

A battery station gives off no exhaust, so it can sit indoors within the temperature range its manual gives. Our camping power checklist helps if it is going camping.

How it compares

How the Goal Zero Yeti 300 stacks up against the closest alternative, the BLUETTI Elite 30 V2.

CriterionGoal Zero Yeti 300BLUETTI Elite 30 V2
Our rating7.1/107.1/10
Battery capacity297 Wh288 Wh
Continuous outputNot stated600 W
WeightNot stated4.3 kg
Wall charge to 80 %Not stated45 min

Both score 7.1/10. The BLUETTI Elite 30 V2 adds more continuous output (600 W) and less weight (4.3 kg), while the Goal Zero Yeti 300 brings a bigger battery (297 Wh).

The score in detail

How we rated it

Spec-based rating on a 4.5–8.5 scale: 4.5 + average of the 4 criteria × 0.4. Capped at 8.5 because no customer evidence is included.

Key specifications

7 / 10

Build, warranty & certifications

7 / 10

Listing documentation

6 / 10

Fit & compatibility

6 / 10

This product has no captured buyer-review record yet, so its rating comes from the documented listing alone: four criteria scored out of 10 (key specifications; build, warranty and certifications; listing documentation; fit and compatibility), placed on a 4.5–8.5 scale. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the Goal Zero Yeti 300 any good?

We rate it 7.1/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.

How much capacity and output does the Goal Zero Yeti 300 have?

Its listing title states 297 Wh of battery capacity. Watt-hours decide how long it lasts; continuous watts decide what can run at the same time. These are the seller's figures, so check them against the manual.

How long will the Goal Zero Yeti 300 run a 100 W load?

Roughly 2.5 hours: 297 Wh × 0.85 for conversion losses ÷ 100 W. Idle draw, cold weather and battery age move the real figure, and our power runtime calculator works with your own numbers.

What do you get with the Goal Zero Yeti 300?

Its listing states 297 Wh of stored energy, an automatic backup (UPS/EPS) mode and LiFePO4 cells rated for 4,000 cycles. These are the seller's figures; how long it really lasts on your fridge and how loud the fan gets under load can't be read from a listing.

What should I check before ordering the Goal Zero Yeti 300?

Your load list: 297 Wh, per the listing. Write down what has to run at the same time and for how long, then let our runtime calculator do the sums. The start-up spike: anything with a compressor or a motor pulls a short spike when it starts; our refrigerator guide shows how to check a fridge or a freezer. The switch-over: ask the seller for the transfer time in milliseconds, then check it against what your PC or medical device tolerates. Our EPS vs UPS guide explains the difference. Where it lives: a battery station gives off no exhaust, so it can sit indoors within the temperature range its manual gives. Our camping power checklist helps if it is going camping.

Where can I buy the Goal Zero Yeti 300?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Sources