
Anker SOLIX C1000 Gen 2
7.3Good · out of 10$529.99 -34% List price- Portable power stations

Product images: Amazon listings
The Anker SOLIX C1000 Gen 2 keeps it simple: a power station with UPS switch-over in 10 ms. It is a good match for a quiet backup for the essentials, at 7.3/10 on its documented specs.
| Brand | Anker |
|---|---|
| Category | Portable power stations |
| Charge cycles (stated) | 4,000 |
| UPS / EPS mode | Stated, 10 ms switch-over |
| Outputs named in the listing | 10 |
| ASIN | B0FN7MSY4L |
Full listing title: Anker SOLIX C1000 Gen 2 Portable Power Station
The two power stations closest to it on our rating, with a dated price.



What it has going for it
UPS, 10 ms. Leave the router, the PC or a CPAP plugged in through it: when the grid drops, the station takes over on its own, in 10 ms per the listing. Before you trust it with a desktop computer, read the manual on switch-over time.
10 outputs. Enough sockets and ports that the fridge, the router, a lamp and the phones won't need a power strip.
App control. Check the charge and switch outputs from your phone, handy when the station lives in the garage or the basement.
The seller states, word for word, in the Anker SOLIX C1000 Gen 2 listing:
With upgraded HyperFlash tech, fully recharge at 1,600W—for outage prepping, camping trips, or tailgating events.
Delivers 2,000W (3,000W peak) and 1,024Wh capacity.
After 4,000 cycles, the battery still has at least 80% capacity.
Plug in 600W (60V max) of solar and recharge in just 1.8 hours.
Keep vital equipment like CPAP machines and laptops running with under 10 ms UPS switchover.
Their words and their figures.

What the Anker SOLIX C1000 Gen 2 listing names:
In the box, per the listing: AC Charging Cable, Quick Start Guide.
That is what the listing says comes with the Anker SOLIX C1000 Gen 2. Check the box on delivery day, before the cardboard goes out with the recycling.
Check your own plugs and your load list against it before you order.

The button opens the exact listing (ASIN B0FN7MSY4L), where today's price, stock and seller apply.

Rather have LiFePO4 cells? The BLUETTI AC180 (9.4/10) names LiFePO4 in its listing.
Want the panel in the same box? The Jackery Explorer 1000 v2 + 200W Panel (9.3/10) comes as a kit, station and panel matched by the seller.
Our take
The Anker SOLIX C1000 Gen 2 is about UPS switch-over in 10 ms, and it doesn't pretend to be more. No buyer reviews yet, so the Anker SOLIX C1000 Gen 2 has to win you over on paper. The catch with this Anker power station: no LiFePO4 battery named in the listing, while most picks here have one. We'd pick it if the router or a CPAP has to stay on without you touching anything; otherwise, put it next to the Goal Zero Yeti 1500 first.
Charge it to full from the wall, then plug in a lamp and one thing you really rely on, so you know how it behaves before you need it.
If the router or the fridge already runs through it, the switch-over happens on its own (10 ms, per the listing). Watch the percentage for the first hour; it tells you more about your real runtime than any chart.
It refills from the wall between outages. Know how you would top it up if the grid stays down for days.
Store it at the charge level the manual recommends and top it up every few months. Our storage guide has the routine.
One thing to settle before the Anker SOLIX C1000 Gen 2 ships: check the capacity and the output, because the listing we read gives no clear watt-hours or continuous watts, so ask for both before you plan around it.
Write down what has to run at the same time and for how long, then let our runtime calculator do the sums.
Anything with a compressor or a motor pulls a short spike when it starts; our refrigerator guide shows how to check a fridge or a freezer.
10 ms, per the listing. Fine for most routers and lamps; for a desktop PC or a medical device, read our EPS vs UPS guide and the manual first.
A battery station gives off no exhaust, so it can sit indoors within the temperature range its manual gives. Our storage guide has a simple routine for the months between outages.
How the Anker SOLIX C1000 Gen 2 stacks up against the closest alternative, the Goal Zero Yeti 1500.
| Criterion | Anker SOLIX C1000 Gen 2 | Goal Zero Yeti 1500 |
|---|---|---|
| Our rating | 7.3/10 | 7.2/10 |
| UPS / EPS | 10 ms | Not stated |
| LiFePO4 | Not stated | Stated |
Pick the Goal Zero Yeti 1500 if LiFePO4 cells matter more to you; on our rating, the Anker SOLIX C1000 Gen 2 comes out ahead.
We rate it 7.3/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.
Its listing states a 10 ms UPS switch-over. These are the seller's figures; how long it really lasts on your fridge and how loud the fan gets under load can't be read from a listing.
Your load list: write down what has to run at the same time and for how long, then let our runtime calculator do the sums. The start-up spike: anything with a compressor or a motor pulls a short spike when it starts; our refrigerator guide shows how to check a fridge or a freezer. The switch-over: 10 ms, per the listing. Fine for most routers and lamps; for a desktop PC or a medical device, read our EPS vs UPS guide and the manual first. Where it lives: a battery station gives off no exhaust, so it can sit indoors within the temperature range its manual gives. Our storage guide has a simple routine for the months between outages.
We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.